ThermostatHistory Attributes
Categories: OpenAPI Thermostat API ThermostatHistory Attributes UPDATED The ThermostatHistory attributes enable retrieval of historical readings and setpoint information from Pelican thermostats. To perform a ThermostatHistory request, you must specify at least the required selection attributes, including a starting date/time (startDateTime) and an ending date/time (endDateTime). If no specific object attributes are requested, the API will […]
SharedSchedule Attributes
Categories: OpenAPI Thermostat API SharedSchedule Attributes UPDATED SharedSchedule attributes allow you to set shared schedules for thermostats. Attribute names are not case-sensitive, while attribute values are case-sensitive. Predefined system-managed attributes for SharedSchedule objects, used for essential functions like temperature control, system status, and scheduling. They follow a fixed structure and cannot be renamed or redefined […]
ThermostatEvent Attributes
Categories: OpenAPI Thermostat API ThermostatEvent Attributes UPDATED The ThermostatEvent attributes allow you to schedule one-time events that override a thermostat’s standard recurring schedule. This interface enables adding, modifying, or deleting events, as well as retrieving existing pending events. Events added through the API are tracked as “External” events. There are no restrictions on the number […]
ThermostatSchedule Attributes
Categories: OpenAPI Thermostat API ThermostatSchedule Attributes UPDATED ThermostatSchedule attributes allow you to list and set a thermostat’s recurring schedules. Attribute names are not case-sensitive, while attribute values are case-sensitive. Predefined system-managed attributes for ThermostatSchedule objects, used for essential functions like temperature settings, system settings, and scheduling times. They follow a fixed structure and cannot be […]
Thermostat API Overview
Categories: OpenAPI Thermostat API Thermostat API Overview UPDATED The Pelican OpenAPI provides a comprehensive set of thermostat-related API categories, allowing developers to retrieve and modify configurations, monitor active statuses, manage schedules, and access historical data. These APIs support interactions with individual thermostats, all thermostats at a site, or specific subsets based on defined attributes. Thermostat […]
Thermostat Attributes
Categories: OpenAPI Thermostat API Thermostat Attributes UPDATED Thermostat attributes enable setting and retrieving configuration settings and real-time status information. Predefined system-managed attributes for Thermostat objects, used for essential functions like temperature control, system status, and scheduling. They follow a fixed structure and cannot be renamed or redefined by users. Reserved Attributes User Defined Attributes Custom attributes […]
How much data does the Pelican Solution use?
How much data does the Pelican Solution use? So low you will not be able to measure it on your network. A single Pelican thermostat, which has the highest data usage, generates about 5 megabytes of traffic per month. This is equivalent to around 0.15 bytes per second OR 0.00000015 megabytes per second. In other […]
What should I set Notification Settings to?
What should I set Notification Settings to? There are three configurations under Notification Settings, this section goes over each configuration: Sensitivity To generate an automated cooling or heat failure notification, two things need to happen: The room’s temperature is not moving in the correct direction, during an active heating or cooling cycle, compared with an hour […]
What should I set Reheat Type to?
What should I set Reheat Type to? This configuration is only available for sites that have Pelican Zone Controllers (Z8 or Z24) and thermostats that have System Type set to Single Duct Damper. Reheat Type This configuration is found under: Admin > Thermostat Configuration > “select any thermostat” > System Type set to Zone Damper > Zone […]
What should I set Damper Type to?
What should I set Damper Type to? This configuration is only available for sites that have Pelican Zone Controllers (Z8 or Z24) and thermostats that have System Type set to Single or Dual Duct Damper. Damper Type This configuration is found under: Admin > Thermostat Configuration > “select any thermostat” > System Type set to Zone […]