| RT2 Series: Wireless Averaging Sensor

Remote Wireless Sensor (RT2)

The Pelican Remote Wireless Sensors (RT2)

| RT2 Series: Wireless Averaging Sensor

Wireless Sensors (RT2)

| RT2 Series: Wireless Averaging Sensor

| Multi-room Temperature Averaging

Our remote wireless sensors allow you to easily detected, average, and data log room temperatures across multiple areas. When averaging, these sensors communicate over the wireless back to a single primary Pelican thermostat. The weighting between the primary thermostat and its remote wireless sensor(s) is customizable through the Pelican web-app.

MULTIPLE AVERAGING SENSORS

8 Per Thermostat

Each primary Pelican thermostat can communicate with up to eight (8) Remote Wireless Sensors. Each one's temperature detection is then weighted in the Pelican App.

BALANCE

Automated Fan Circulation

If the temperatures between the primary Pelican thermostat and its remote sensors are far from each-other. The system will automatically turn on the fan to try and balance the temperatures between the spaces.

WEB-APP CONNECTED

Virtual

Each Remote Wireless Sensor will send its room's temperature back to your Pelican App, so you can review and monitor each space individually.

| Multi-room,Temperature Averaging

Our remote wireless sensors allow you to easily detected, average, and data log room temperatures across multiple areas. When averaging, these sensors communicate over the wireless back to a single primary Pelican thermostat. The weighting between the primary thermostat and its remote wireless sensor(s) is customizable through the Pelican web-app

DESIGN

Battery Powered

Thermostats are often needed in locations where running thermostat wire can be problematic or costly. Pelican's RT2-DC provides a solution by offering a remote wireless sensor. This allows for greater flexibility in where the sensor can be placed, without the need to run additional wiring.

RT2-DC is powered by (2) AA batteries.

BALANCE

Automated Fan Circulation

If the temperatures between the primary Pelican thermostat and its remote sensors are far from each-other. The system will automatically turn on the fan to try and balance the temperatures between the spaces.

MULTIPLE AVERAGING SENSORS

8 Per Thermostat

Each primary Pelican thermostat can communicate with up to eight (8) Remote Wireless Sensors. Each one's temperature detection is then weighted in the Pelican App.

WEB-APP CONNECTED

Virtual

Right from the Pelican App you can view if systems are on or off, enable/disable relays in real-time, set schedules, and view historical data.

| Multi-room Temperature Averaging

Our remote wireless sensors allow you to easily detected, average, and data log room temperatures across multiple areas. When averaging, these sensors communicate over the wireless back to a single primary Pelican thermostat. The weighting between the primary thermostat and its remote wireless sensor(s) is customizable through the Pelican web-app.

MULTIPLE AVERAGING SENSORS

8 Per Thermostat

Each primary Pelican thermostat can communicate with up to eight (8) Remote Wireless Sensors. Each one's temperature detection is then weighted in the Pelican App.

BALANCE

Automated Fan Circulation

If the temperatures between the primary Pelican thermostat and its remote sensors are far from each-other. The system will automatically turn on the fan to try and balance the temperatures between the spaces.

WEB-APP CONNECTED

Virtual

Right from the Pelican App you can view if systems are on or off, enable/disable relays in real-time, set schedules, and view historical data.

| Wireless communication.

All Remote Wireless Sensors communicate to their primary Pelican thermostat over the Pelican wireless network.

| Wireless communication.

All Remote Wireless Sensors communicate to their primary Pelican thermostat over the Pelican wireless network.

| Wireless communication.

All Remote Wireless Sensors communicate to their primary Pelican thermostat over the Pelican wireless network.

| Common Applications

Temperature Averaging

Install up to eight (8) Remote Wireless Sensors to average their room temperature readings with your Primary Pelican Thermostat. Through the Pelican App, set the weighted average between each sensor.

When the Primary Pelican Thermostat sees that its Remote Wireless Sensor’s temperature is different than its temperature, it will automatically enable the fan to balance out the facility.

Use the Pelican App to analyze the different temperatures between where your primary Pelican thermostat is installed and all your Remote Wireless Sensors. This will help with making sure your HVAC system is probably balanced for the area it serves.

Re-Locate Thermostat

Sometimes your primary Thermostat is just not in an ideal location to detected the entire facility’s temperature. An RT2 can easily be installed in a better location, and weighted as 100% the temperature to be maintained.

Monitor Temperature

Sometimes we just need to monitor a space’s temperature to make sure it is within a proper range. Our Remote Wireless Thermostat can be installed as a simple web-connected monitoring device.

If the temperature in the space being monitored goes outside of a settable range, the Pelican EMS will send you a notification, so you can fix something small before it turns into something big.

| Common Applications

Temperature Averaging

Install up to eight (8) Remote Wireless Sensors to average their room temperature readings with your Primary Pelican Thermostat. Through the Pelican App, set the weighted average between each sensor.

When the Primary Pelican Thermostat sees that its Remote Wireless Sensor’s temperature is different than its temperature, it will automatically enable the fan to balance out the facility.

Use the Pelican App to analyze the different temperatures between where your primary Pelican thermostat is installed and all your Remote Wireless Sensors. This will help with making sure your HVAC system is probably balanced for the area it serves.

Re-Locate Thermostat

Sometimes your primary Thermostat is just not in an ideal location to detected the entire facility’s temperature. An RT2 can easily be installed in a better location, and weighted as 100% the temperature to be maintained.

Monitor Temperature​

Sometimes we just need to monitor a space’s temperature to make sure it is within a proper range. Our Remote Wireless Thermostat can be installed as a simple web-connected monitoring device.

If the temperature in the space being monitored goes outside of a settable range, the Pelican EMS will send you a notification, so you can fix something small before it turns into something big.

| Common Applications

Temperature Averaging

Install up to eight (8) Remote Wireless Sensors to average their room temperature readings with your Primary Pelican Thermostat. Through the Pelican App, set the weighted average between each sensor.

When the Primary Pelican Thermostat sees that its Remote Wireless Sensor’s temperature is different than its temperature, it will automatically enable the fan to balance out the facility.

Use the Pelican App to analyze the different temperatures between where your primary Pelican thermostat is installed and all your Remote Wireless Sensors. This will help with making sure your HVAC system is probably balanced for the area it serves.

Re-Locate Thermostat

Sometimes your primary Thermostat is just not in an ideal location to detected the entire facility’s temperature. An RT1 can easily be installed in a better location, and weighted as 100% the temperature to be maintained.

Monitor Temperature

Sometimes we just need to monitor a space’s temperature to make sure it is within a proper range. Our Remote Wireless Thermostat can be installed as a simple web-connected monitoring device.

If the temperature in the space being monitored goes outside of a settable range, the Pelican EMS will send you a notification, so you can fix something small before it turns into something big.

| Web-App enabled control.

Right from the Pelican App you can manage all aspects of the Pelican Remote Average Thermostats: set weighted temperature averages, manage schedules, view historical data, and more.

| Web-App enabled control.

Right from the Pelican App you can manage all aspects of the Pelican Remote Average Thermostats: set weighted temperature averages, manage schedules, view historical data, and more.

| RT2-DC

BATTERY POWER

(2) AA Batteries

The RT2-DC is powered by a two AA batteries. When batteries are low, an automated notification will be sent by the Pelican EMS.

| RT2-DC

BATTERY POWER

(2) AA Batteries

The RT2-DC is powered by a two AA batteries. When batteries are low, an automated notification will be sent by the Pelican EMS.

| Technical Specifications

MODELS

RT2-DC

DIMENSIONS

in:  5.2 X 3.9 X 0.75
mm: 132 X 99 X 19

MOUNTING

Designed to be mounted an a single gang electrical box or on a flat surface.

POWER

RT2-DC: Two (2) AA batteries (included)

WIRELESS

2.4GHz wireless frequency, IEEE 802.15.4 wireless standard.
Complies with Class B Part 15 of FCC rules.
Does not interfere or communicate with WiFi/802.11 networks.

RT2-DC: Does NOT repeat wireless signals.

COMPATIBILITY

Compatible with any Pelican TS or TC Series thermostat.
Can also be used as a stand-alone temperature sensor.

ALERTS & NOTIFICATIONS

Temperature safe range notification.
Unreachable device notification.
RT2-DC: Low Battery Notification.

OPERATING RANGE

-4°F to 160°F
5 to 90 % Relative Humidity (non-condensing)

STORAGE

-20°F to 160°F

SYSTEM PROTECTIONS​

Tamper proof security screw.
Limit heat and cool set-point ranges.
Front Keypad Lock/Unlock

| Technical Specifications

MODEL

RT2-DC

DIMENSIONS

in: H5.2 X W 3.9 X D 0.75
mm: H 132 X W 99 X D 19

MOUNTING

Designed to be mounted an a single gang electrical box or on a flat surface.

POWER

RT2-DC: Two (2) AA batteries (included)

WIRELESS

2.4GHz wireless frequency, IEEE 802.15.4 wireless standard.
Complies with Class B Part 15 of FCC rules.
Does not interfere or communicate with WiFi/802.11 networks.

RT2-DC: Does NOT repeat wireless signals.

COMPATIBILITY

Compatible with any Pelican TS or TC Series thermostat.
Can also be used as a stand-alone temperature sensor.

ALERTS & NOTIFICATIONS

Temperature safe range notification.
Unreachable device notification.
RT2-DC: Low Battery Notification.

OPERATING RANGE

-4°F to 160°F
5 to 90 % Relative Humidity (non-condensing)

STORAGE

-20°F to 160°F

SYSTEM PROTECTIONS​

Tamper proof security screw.
Limit heat and cool set-point ranges.
Front Keypad Lock/Unlock

| Technical Specifications

MODELS

RT2-DC

DIMENSIONS

in: 5.2 X 3.9 X 0.75
mm: 132 X 99 X 19

MOUNTING

Designed to be mounted an a single gang electrical box or on a flat surface.

POWER

Two (2) AA batteries (included)

WIRELESS

2.4GHz wireless frequency, IEEE 802.15.4 wireless standard.
Complies with Class B Part 15 of FCC rules.
Does not interfere or communicate with WiFi/802.11 networks.

RT2-DC: Does NOT repeat wireless signals.

COMPATIBILITY

Compatible with any Pelican TS or TC Series thermostat.
Can also be used as a stand-alone temperature sensor.

ALERTS & NOTIFICATIONS

Temperature safe range notification.
Unreachable device notification.
RT2-DC: Low Battery Notification.

OPERATING RANGE

-4°F to 160°F
5 to 90 % Relative Humidity (non-condensing)

STORAGE

-20°F to 160°F

SYSTEM PROTECTIONS​

Tamper proof security screw.
Limit heat and cool set-point ranges.
Front Keypad Lock/Unlock

| Product Documentation

| Product Documentation

Installation Guides

Datasheets

LEARN MORE

DISCOVERMOREPELICAN

HEAR THEIR STORIES

PELICANIMPACTSOTHERS

With hundreds of thousands of customers using Pelican, we want you to hear some of their stories.

LEARN MORE

DISCOVERMOREPELICAN

HEAR THEIR STORIES

PELICANIMPACTSOTHERS

With hundreds of thousands of customers using Pelican, we want you to hear some of their stories.