The GW400 Wireless Extended Range Gateway Series connects all your Pelican devices to the Pelican Web-app via a secure, encrypted connection.
The GW400 connects to an existing business Ethernet connection, whereas the GW400-LTE runs on the Pelican AnyWhere 4G/LTE cellular network.
Whatever your networking requirements, get your Pelican devices online in no time with the GW400 Series.
Wireless Extended Range Gateways - GW400 Series
A Gateway For Any Application
The GW400-LTE gateway is an integrated cellular-enabled device. It can be installed anywhere there is cellular connectivity available, eliminating the need for a direct hardwired Ethernet source.
Not WiFi - Just Wireless!
A fundamental approach to Internet security is to start with a design that eliminates risk. By utilizing advanced mesh network technology (not WiFi) Pelican keeps thermostat communication separate from your business network. No cross communication is possible. Simple and smart.
_
_
_
Scalable Wireless Solution
Connect up to 2000 thermostats automatically via a single Pelican Gateway. Using our advanced wireless mesh network, thermostats automatically connect to each other and back to the Gateway.

_
_
_
The GW400 gateway is a plug-and-play wired Ethernet device. It plugs into an existing Ethernet switch or router and is designed to the highest enterprise security standards.
GW400 Ethernet Gateway
GW400-LTE Cellular Gateway
Which Gateway do I need?
The GW400 Series allows you to easily implement Pelican into any commercial building without ever needing to worry about complex Internet or wireless setup and configuration.
Decide which Gateway you need depending on your networking requirements.
The GW400 gateway is a plug-and-play wired Ethernet device. It plugs into an existing Ethernet switch or router and is designed to the highest enterprise security standards. It uses an outbound-only connection, with encrypted end-to-end communication, and the option for DHCP (default) or Static IP addressing. Setup is fast and easy for any installation team.
GW400 Ethernet Gateway
GW400-LTE Cellular Gateway
The GW400-LTE gateway is an integrated cellular-enabled device, which connects your Pelican devices to the Internet. It can be installed anywhere there is cellular connectivity available, eliminating the need for a direct hardwired Ethernet source. It is designed to meet enterprise level security standards and will only communicate with Pelican products.
Typical Applications
The GW400-LTE is ideal for commercial customers who face specific connectivity challenges:
Typical Applictions
The GW400 provides Internet connectivity for commercial buildings in key industries:
Commercial buildings
In commercial buildings where the building owner seeks to optimize building efficiency and track and bill tenants' after-hours energy usage.
Schools
School districts choose Pelican as a powerful, cost efficient means of updating their HVAC controls and use the GW400 to gain control over portable classrooms spread over multiple sites.
Hotels
The GW400 is the ideal solution for hotels, enabling them to manage common areas and guest rooms to improve guest comfort and satisfaction.
Multi-tenant commercial buildings
In multi-tenant commercial buildings where the building owner lacks an Internet connection independent of their tenants'.
New construction sites
In new construction sites where there is no Internet connection at all and contractors are waiting on an Ethernet connection being installed.
Limited or restrictive IT environments
In environments where there is limited Internet connectivity or restrictions placed around contractors' access to the customer's network.
Wireless Bridge
The Gateway acts as a single bridge for up to 2000 Pelican thermostats. This enables the entire Pelican system to reach the Internet using a single device.
Encrypted Secure Connection
The Gateway is completely isolated from your internal network. The Gateway uses AES (Advanced Encryption Standard) to maintain a secure connection with Pelican servers.
Outbound Only Connection
The Gateway establishes an outbound-only connection to Pelican Cloud servers via Ethernet or cellular connection.
_
Wireless Mesh Network
Pelican thermostats automatically connect with each other to reach the Gateway via our self-creating, self-healing mesh network.
GW400
GW400
5 VDC; 200 mA
AC Adapter Provided
GW400-LTE
5 VDC; 2.0 A
AC Adapter Provided
Power
Wireless
Size
Frequency: 2.4GHz, IEEE 802.15.4
(does not interfere with WiFi/802.11)
Complies with Class B Part 15 of FCC rules

Height: 4.5 inch (114 mm)
Width: 3.5 inch (89 mm)
Depth: 1.25 inch (32 mm)
Antenna: 7.25 inch (184 mm)
IP ADDRESS
GW400:
DHCP (default) or Static
Included with GW400
GW400:
(1) 10 foot long CAT5 Ethernet Cable
(1) 120 VAC Power Adapter
_
GW400-LTE:
Not applicable
GW400-LTE:
(1) 120 VAC Power Adapter
Temperature
Operating Range: -4oF to 122oF
Storage Range: -20oF to 160oF
Relative Humidity (non-condensing)
5% to 90% operating and storage

Installation Instructions
_
Product Specification

Application/Engineering Guides





Terms of Service

Media
What's in the box?
Find out what's in the box when you purchase a GW-400 Wireless Gateway.
What's in the box?
Find out what's in the box when you purchase a GW-400 LTE Wireless Cellular Gateway.
ThermostatOptions

Temperature Only


Temperature and CO2
Temperature, Humidity, & CO2
TS200
TS250
TS250H
Thermostataccessories

Temperature and Alarm Sensor


PEARL Economizer
Wireless Power Control