The TS200H is a commercial grade temperature thermostat with a built in humidity sensor. The TS200H is designed for familiarity, simplicity, and intuitiveness. With Online temperature and humidity management, configuration, and scheduling, you now have control of your building's comfort and efficiency. Start reducing energy use and increase comfort throughout your facility today!

Internet Programmable Thermostat with

Humidity (TS200H)

Temperature and Humidity





Humidity and temperature in one.

Managing temperature and humidity means greater control over comfort in building spaces. The TS200H combines both functions into a single Internet enabled thermostat. It shows you exactly how your building is running. With advanced alarming algorithms, receive alerts if the temperature or humidity in a space exceeds or drops below a settable range. You are always in control.

Limited Wire Friendly

Pelican delivered an industry changing solution when it introduced a simple way to deal with limited thermostat wire. With only three wires, the Pelican TS200H can control up to 2H/2C Conventional or 3H/2C Heat Pump HVAC units. Never pay for unnecessary wire to be run or extra equipment. Pelican saves you time and money with their retrofit friendly designs.




Automated Wireless Connection

Because we integrate our advanced wireless mesh network into every thermostat, there is ZERO wireless setup required. No passwords to enter or complex connection processes to go through. Thermostats automatically connect to each other and back to the Pelican Gateway (GW400). Easy plug and play technology with no WiFi interference or requirement.


The Wiring Module (WM700) 

The WM700 comes with every Pelican TS200H purchase. Installation is simple with limited wiring between the HVAC unit and thermostat. Simply remove the WM700, install it inside the HVAC unit, and use the (3) standard unshielded wire to connect to the TS200H.



Online Management


The TS200H automatically connects wirelessly to a Pelican Wireless Gateway (GW400) installed at the customer's site. You can now manage all configuration, scheduling, and system operation right from your smartphone, tablet, or PC. Complete control at your fingertips no matter where you are.

Alarm Notifications


Every TS200H monitors its own space temperature and humidity levels in real-time. Using advanced diagnostic and reporting capabilities, the TS200H notifies you when your HVAC system fails. You can now quickly determine the issue and resolve the problem.

Humidity Control


With real-time humidity monitoring, the TS200H provides true space humidity level management. The TS200H can energize both the dehumidifier and humidifier. Or, it can dehumidify by running the A/C. Humidity levels are graphed and displayed virtually on the Pelican Web App.


Easy Installation


The TS200H installs the same way as any stand-alone programmable thermostat. It connects to the HVAC unit using standard thermostat wire. But, Pelican went one step further. The TS200H only requires (3) wires to connect to the HVAC unit for up to 2H/2C Conventional, 3H/2C Heat Pump, and/or Humidification and Dehumidification management. Now you never have to pull wire to install the Pelican thermostat.


Energy Efficiency


Internet connectivity gives accurate information based on exactly how every thermostat is operating in your building. You can start creating schedules for managing each space, or create Group Schedules for sharing between multiple thermostats. With real control right at your fingertips, saving money and increasing comfort is now a simple and efficient!


Historical Trend Data


Every TS200H tracks trend data in real-time so you can visually see exactly how your spaces are operating at any moment of the day. This data is accessible Online for up to 2 years for every thermostat. The TS200H also tracks Usage Data, so you can lean how much energy is allocated to just the HVAC vs. other building electrical loads.


Hardwire: 24VAC, 60Hz; 50mA

Voltage Rating: 23 - 30VAC

Relay Current: 1.0A running





Conventional Unit 

R: 24VAC

C: Neutral

Rc: 2nd 24VAC Transformer

Y: 1st Stage Cool

W: 1st Stage Heat

Y2: 2nd Stage Cool

W2: 2nd Stage Heat

G: Fan

Hu: Humidification

Dh: Dehumidification

Heat Pump Unit 

R: 24VAC

C: Neutral

Rc: 2nd 24VAC Transformer

Y: 1st Stage Compressor

W: (O/B) Reversing Valve

Y2: 2nd Stage Compressor

W2: AUX Heat

G: Fan

Hu: Humidification

Dh: Dehumidification

Single Duct Damper Actuator

R: 24VAC

C: Neutral

Rc: 2nd 24VAC Transformer

Y: 24VAC Damper Open

W: 24VAC Reheat

Y2 - 24VAC Damper Close

Duel Duct Damper Actuator

R: 24VAC

C: Neutral

Rc: 2nd 24VAC Transformer

Y: 24VAC Cool Damper Open

W: 24VAC Heat Damper Open

Y2: 24VAC Cool Damper Close

W2: 24VAC Heat Damper Close


Height: 3.5 inch (89 mm)

Width: 5.97 inch (150 mm)

Depth: 1.5 inch (38 mm)


Thermostat Range

Operating Range: -4 deg. F to 122 deg. F

Differential Temperature: +/- 0.5 deg. F

Operating Humidity (% RH): 5 to 90%; non-condensing

Humidify Setting Range: 10 - 80% RH

Dehumidify Setting Range: 20 - 90% DH

Storage Temperature: -20 deg. F to 160 deg. F


System Protection

Thermostat Front Plate Tamper Proof Security Screw

Four Minute Compressor Short Cycle Protection

Temporary Schedule Override

Thermostat Keypad Lockout

Trend Data Analytic and Fault Monitoring

Auxiliary/Emergency Heat Efficiency Algorithm

Humidity Dead Band Protection

UL Certified



Installation Instructions 


Product Specification

Application/Engineering Guides


Alternative text - include a link to the PDF!


What's in the box? 


Find out what's in the box when you purchase a TS200H Internet Programmable Thermostat with Humidity.

How to remove and install Pelican's three-wire module 


Watch to learn how to remove the WM500 Wiring Module from a Pelican thermostat and install it into a PEARL Economizer Controller.



Temperature and Alarm Sensor 


PEARL Economizer

Wireless Proximity Sensor



Temperature Only


Temperature and CO2

Temperature, Humidity, & CO2